84
Updating Firmware
The SE-900 firmware will be updated from time to time. This may be to add new features, modify existing
features, or to correct errors or bugs.
The firmware will be made available to registered users, please ensure that you register your product as it
will not be possible to inform you of firmware changes if you don’t.
The firmware is contained on an SD card which is fitted to the Remote Control Card.
Remove the SD Card from the Remote Control Card and load the firmware update onto it using a computer.
The firmware must be loaded to the root directory of the SD Card, i.e. not in a folder.
Re-insert the SD Card and re-fit the Remote Control Card to the SE-900 base unit. Power the SE-900 up
and wait for the control panel display to show the standard Status Display.
N.B. It is extremely important that the SE-900 is not switched off during updating. If power is lost, or
the SE-900 is switched off the system will have to be returned to Datavideo for servicing. Please
ensure that while updating the SE-900 is powered from a reliable source and that the unit is not
powered down.
Press the Settings Key to call up the Set Up Menus and highlight option 12. UPDATE FIRMWARE. Press the
Enter Key to call up the Update Menu.