Datalogic Pegaso, Product Reference Manual

Page: 71 / 172

SNMP
Product Reference Guide 4-9
Network Setup: Remote ActiveSync
To execute a
Remote ActiveSync
, complete the following steps:
1. Go to
Start > Programs > Communication > Netlink
.
2. Select the target host to which you wish to connect in the
Connect To
field.
3. Tap
Connect
.
4. A network ActiveSync connection will be established.
Network functions and operations work the same when using the Dock.
SNMP
SNMP (Simple Network Management Protocol) is the standard protocol for managing
devices on a network. The Falcon Management Utility (FMU) makes use of SNMP to
send and receive configuration information to the Datalogic terminals. Since the net-
worked terminals are constantly running SNMP, this allows FMU to interface with the
terminal at any time, without requiring user intervention on the terminal.
With SNMP running on the terminal, other SNMP based network management tools
such as HP Openview
®
and CastleRock SNMPpc
®
may also be used to interface with
the terminals. To support this capability, Datalogic has released the Management Infor-
mation Base (MIB) for the Datalogic Windows-based terminals. The MIB is used by
the management tools to allow them to better support the configuration values provided
on the terminals, such as scanner controls and terminal type information.
You must have established an ActiveSync partnership with a host before you can use
Remote ActiveSync to connect to it. To establish an ActiveSync connection with the
Pegaso, refer to "Installing & Setting Up Microsoft ActiveSync" on page 4-1.
The MIB is available at
www.mobile.datalogic.com.
For more information on SNMP, refer to "SNMP Interface", or go to:
http://www.microsoft.com.