Datalogic Pegaso, Product Reference Manual

Page: 58 / 172

3-12 Pegaso™ Industrial PDA with Windows
®
CE
6. Click
Update Terminal
on
FUU
on the host PC.
7.
FUU
will restore the firmware on the Pegaso as shown on page 3-10 .
8. After the firmware has been restored, the Pegaso will automatically reset.
AutoStart
The AutoStart program provides three functions:
• Allows you to create a list of applications (with optional command line arguments)
to run automatically prior to loading CAB files.
• Automatically reinstalls specified CAB files when the Falcon is Hard Reset.
• Allows you to create a list of applications (with optional command line arguments)
to run automatically after loading CAB files.
AutoStart launches each time the Falcon is rebooted. AutoStart first runs
PreAuto.ini
(reference Table 3-3 for the location), executing each line with the spec-
ified command line arguments. It will take into account any AutoStart options at the
begining of the line.
Upon a Cold Reset, AutoStart installs all the CAB files located in the AutoStart CAB
folder. If the AutoStart CAB folder does not exist, no CAB files will be installed.
Table 3-2. AutoStart CAB folder location
AutoStart will then run the
Autostart.ini
(reference Table 3-3 for the location),
executing each line with the specified command line arguments. It will take into
account any AutoStart options at the beginning of the line.
Please be patient and do not remove the Pegaso from the Dock during this procedure.
The firmware image of the Pegaso can take as long as:
• 6 minutes to download using a USB connection.
• 22 minutes to download using a serial connection with 115K baud rate.
• 130 minutes to download using a serial connection with 19.2K baud rate.
Product Operating System Location
F4400
Windows CE
\FlashFX Disk
Windows Mobile
\FlashDisk