Datalogic Magellan 8500Xt, Product Reference Manual, Page: 424 / 480

A-8
Magellan
TM
8500Xt Scanner
Manual EAS Deactivation Push Button
Using the programming barcodes contained in
Chapter 7, Programming
,
the button can be configured to operate always, or only function when the
scanner is enabled.
PRESS
DURATION
FUNCTION COMMENT
Momentary
a
a. For use in Coupled Mode only
Manually initiates EAS
deactivation
Place the item with the EAS tag downstream
b
b. “Downstream” in this case is defined as being the downstream side of the scan window from the direction
of product flow, or scanning direction.
of the hori-
zontal scan window and push the button.
3 Seconds upon
EAS error
Allows scanner to resume
function despite EAS sys-
tem failure (non-fatal error)
EAS Failure Mode is indicated
c
c. If the EAS failure corrects itself, blinking will stop and the EAS LED will turn green.
by:

- EAS LED blinks ON/OFF red, scanning disabled.

- FRU Status LED Indicator blinks ‘9’

- Error tone is sounded for one second

Upon pressing the button for 3 seconds, the scanner will
sound 3 high-pitched beeps, then resume scan function.
The EAS LED and FRU Status LED will continue blinking
as above, but at a slower rate until EAS system function
is restored.