manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 351 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 351

Product Reference Guide

 

7-213

Code 39 Stitching

Enables/disables stitching for Code 39 labels. When parts of a Code 39 
barcode are presented to the scanner with this feature enabled, the barcode 
parts will be assembled by the scanner’s software, and the data will be 
decoded if all barcode proofing requirements are met.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan your selection from the barcodes below. You’ll need to cover 

any unused barcodes on this and the facing page to ensure that 
the scanner reads only the barcode you intend to scan.

Complete the programming sequence by scanning the SWITCH barcode.

CODE 39 STITCHING = DISABLE

CODE 39 STITCHING = ENABLE

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments