Datalogic Magellan 8500Xt, Product Reference Manual, Page: 414 / 480

7-276
Magellan
TM
8500Xt Scanner
Standard 2 of 5 Length 2
If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this
feature specifies Standard 2 of 5 second fixed length. If Standard 2of 5
Length Control is set to Variable-Length decoding, this feature specifies
the maximum label length.
NOTE
When in Fixed Length mode, if Length 2 is set to the value of 00 (zero),
then only Length 1 will apply.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET STANDARD 2 OF 5 LENGTH 2 below.
You’ll need to cover any unused barcodes on this and the facing page
to ensure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C
that rep-
resent the desired label length. The selectable range for this option is
1 to 50. Pad all single digit numbers with a leading zero to yield a
two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET STANDARD 2 OF 5 LENGTH 2