manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 148 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 148

7-10

Magellan

TM

 8500Xt Scanner

Test Mode

Use this feature to place the scanner into a testing, or “demo” mode. This 
special mode disables the scanner interface, meaning that barcode data is 
not sent out to the host via the scanner interface. This allows the barcode 
to be scanned continuously without requiring a response from the POS 
terminal.

To return the scanner to normal function, scan the 

TEST MODE = DIS-

ABLE

 barcode below.

NOTE

DO NOT scan the SWITCH barcode before and after scanning the barcodes on 
this page.

Scanning the 

TEST MODE = DISABLE

 barcode sets the Double Read 

Timeout to 600ms.

TEST MODE = DISABLE

TEST MODE = ENABLE

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments