manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 312 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 312

7-174

Magellan

TM

 8500Xt Scanner

UPC/EAN Reconstruction

Enables/disables the ability of the scanner to decode a class of UPC/EAN 
labels with voids. The label voids may be caused by printing defects or 
physical damage. This feature may be helpful in environments with in-
store printed labels.

CAUTION

To set this feature:

1. Scan the SWITCH barcode.

2. Scan either the enable or disable barcode below. You’ll need to cover 

any unused barcodes on this and the facing page to ensure that the 
scanner reads only the barcode you intend to scan.

Complete the programming sequence by scanning the SWITCH barcode.

UPC/EAN RECONSTRUCTION = DISABLE

UPC/EAN RECONSTRUCTION = ENABLE

Enabling this feature increases the potential of misreads.

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments