Datalogic Magellan 8500Xt, Product Reference Manual, Page: 185 / 480

Product Reference Guide
7-47
EAS Retry Count
This feature sets the number of times the deactivation sequence (defined
by the feature, “EAS Deactivation Duration — Retry ”) is restarted after a
failed deactivation attempt.
To set the EAS Retry Count:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET EAS RETRY COUNT below. You’ll need to
cover any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C
that rep-
resent the desired number. The selectable range is 0-15 resets. Pad
all single and double digit numbers with leading zeroes to yield a
two-digit entry (00-15).
NOTE
A setting of zero specifies no deactivation retries upon failed deactivation
attempt.
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET EAS RETRY COUNT