manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 322 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 322

7-184

Magellan

TM

 8500Xt Scanner

GTIN Enable

Enables/Disables the ability to convert UPCE, UPCA, EAN8, and 
EAN13 labels into the GTIN 14-character format.

NOTE

If add-on information is present on the base label prior to the conversion 
taking place, the add-on information will be appended to the converted 
GTIN barcode.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan either the enable or disable barcode below. You’ll need to cover 

any unused barcodes on this and the facing page to ensure that the 
scanner reads only the barcode you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

barcode.

GTIN = DISABLE

GTIN = ENABLE

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments