manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 179 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 179

Product Reference Guide

 

7-41

Productivity Index Reporting (PIR)/Cashier Training (CT)

When PIR/CT is enabled, label quality data is appended to decoded data 
before being presented to the POS. The PIR feature allows the scanner to 
provide information to an external computer indicating how easy the label 
was to read. CT allows the scanner to provide feedback to the cashier on 
how to scan in a more ergonomic fashion.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan your selection from the barcodes below. You’ll need to cover 

any unused barcodes on this and the facing page to ensure that 
the scanner reads only the barcode you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

barcode.

PIR/CT = DISABLE

PIR/CT = ENABLE

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments