manualshive.com logo in svg

Datalogic Magellan 8500Xt, Product Reference Manual, Page: 335 / 480

Share
Download
Datalogic Magellan 8500Xt Product Reference Manual Download Page 335

Product Reference Guide

 

7-197

DataBar Expanded 2D Component Enable

When this feature is enabled, the software will not decode an DataBar 
Expanded barcode with a 2D component associated with it, and the 2D 
component will be discarded.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan your selection from the barcodes below. You’ll need to cover 

any unused barcodes on this and the facing page to ensure that 
the scanner reads only the barcode you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

barcode.

DATABAR EXPANDED 2D COMPONENT = DISABLE

DATABAR EXPANDED 2D COMPONENT = ENABLE

Summary of Contents for Magellan 8500Xt

































































































































































































































































































































































































































































































Reviews:

No comments