Page 77
MS-01424 Mag Stripe Error
Unable to read any data from the card.
Possible Cause 1:
The cards in the input hopper do not have a magnetic
stripe.
Solution 1:
Load magnetic stripe cards in the input hopper.
Possible Cause 2:
The magnetic stripe cards in the input hopper are not
oriented correctly.
Solution 2:
Load magnetic stripe cards correctly in the input hopper.
Possible Cause 3:
The magnetic stripe on the card is High Coercivity
material and the printer is set to Low Coercivity.
Solution 3:
To use the cards you have, set the printer to use High Coercivity
.
To encode with Low Coercivity, obtain Low Coercivity cards.
Make sure the
cards work with your magnetic stripe reader.
Tips for success:
•
If the magnetic stripe card does not have stripe material to match the
tracks sent, this message can appear. For example, this message
appears if you use a two-track card and send three tracks of magnetic
stripe data.
Summary of Contents for SP75 Plus
