DataCard SP75 Plus Manual Download Page 40

Page: 40 / 136

Page 35

Press the Enter key to return to Card Counters. “Lost Cards” appears on line 2.

Press the Enter key to view the total number of cards lost or press the Up or Down
Arrow key to display “Exit” on line 2.

To print cards, press the Enter key repeatedly to return to the “Printer Ready”
display.

View the Network Address Mode, IP Addresses, and MAC Address

With “Status Menu” displayed on line 1, press the Up or Down Arrow key to display
“Network” on line 2.

Press the Enter key. “Address Mode” appears on line 2. Press the Enter key to view
the address mode. The possible values are DHCP or Static IP.

Press the Enter key to return to the Network Status menu. “Data Format” is
displayed on line 2.

Press the Up or Down Arrow key to display “IP Address” on line 2.

Summary of Contents for SP75 Plus









































































































































Search results

Summary of Contents for SP75 Plus

Reviews:

Related manuals for SP75 Plus

Brands by name

Popular brands

DataCard SP75 Plus, Manual

Search results

Summary of Contents for SP75 Plus

Reviews:

Related manuals for SP75 Plus

Brands by name

Popular brands