manualshive.com logo in svg

DataCard CD800S, Installation And User Manual

The DataCard CD800S is a high-quality card printer designed for effortless printing of personalized ID cards. This versatile device ensures professional results and seamless operation. For easy installation and usage, make sure to download the free Installation and User Manual from our website manualshive.com, providing step-by-step instructions for optimal performance.

Share
Download
background image

v

 

113: Close cover to continue ___________________________________________ 81
114: Cover opened during job  _________________________________________ 81
115: Wait for print temperature  _________________________________________ 82
116: Magstripe not available ___________________________________________ 82
117: Reader not available ______________________________________________ 82
118: Print ribbon type problem  _________________________________________ 83
119: Print ribbon not supported _________________________________________ 83
120: User paused the printer  ___________________________________________ 83
121: Print ribbon ID problem ____________________________________________ 83
122: Magnetic stripe format problem  ___________________________________ 84
123: Insert new card then continue  _____________________________________ 84
124: Insert same card then continue ____________________________________ 84

Printer Driver Messages ________________________________________________________ 85

500: The printer is not available. The card cannot print.___________________ 85
501: The printer connection was lost. Printing the card is canceled. _______ 85
502: The card data is missing or is not usable. The card cannot print. ______ 86
503: The magnetic stripe data is missing. The card cannot print. __________ 86
505: Bonjour is not installed. Cannot connect to the printer. ______________ 86
506: A card is currently processing.______________________________________ 87

Clean the Printer ______________________________________________________________ 88

Run a cleaning card_______________________________________________________ 88
Clean the printhead _______________________________________________________ 90

Chapter 6: Card Design and Setup_________________________________________________ 93

Card Components ____________________________________________________________ 94

Color Printing______________________________________________________________ 94

Print Ribbon ___________________________________________________________ 94
Managing Color _______________________________________________________ 95
Printing Text ___________________________________________________________ 95
Printing Graphics_______________________________________________________ 95

Monochrome Printing______________________________________________________ 97

Monochrome Panels in Full-Color Ribbon ________________________________ 97
Monochrome Ribbon __________________________________________________ 97
Printing Bar Codes _____________________________________________________ 98
Printing Text _________________________________________________________  100
Printing Graphics  ____________________________________________________  100

Topcoat Printing_________________________________________________________  100

Card Design: Magnetic Stripe ________________________________________________  102

About Magnetic Stripe___________________________________________________  102
Magnetic Stripe Formats _________________________________________________  103

Card Design: Smart Card ____________________________________________________  105

About Smart Card _______________________________________________________  105

Requirements________________________________________________________  105
Smart Card Codes on the Printer Label________________________________  106

Printing and Non-Printing Areas ______________________________________________  107

Standard Magnetic Stripe Area __________________________________________  107

Summary of Contents for CD800S

























































































































































































































Reviews:

No comments

Related manuals for CD800S

Xerox 5700 Series Manual preview
5700 Series
Brand: Xerox Pages: 25
Samsung SCX-4300 - SCX 4300 B/W Laser Installation Instructions preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 4
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual preview
ML-2240 - 23 Ppm Mono Laser Printer
Brand: Samsung Pages: 16
Samsung ML 2510 - B/W Laser Printer User Manual preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 170
Samsung CLX-3185FN Manual Del Usuario preview
CLX-3185FN
Brand: Samsung Pages: 165
Xerox 770 System Administration Manual preview
770
Brand: Xerox Pages: 114
F+D Feinwerk- und Drucktechnik TOP-ino Operating Instructions Manual preview
TOP-ino
Brand: F+D Feinwerk- und Drucktechnik Pages: 22
TallyGenicom LA550N User Manual preview
LA550N
Brand: TallyGenicom Pages: 145
Tally T2265 SprintPro Reference Manual preview
T2265 SprintPro
Brand: Tally Pages: 217
TallyGenicom 2248 Product Manual preview
2248
Brand: TallyGenicom Pages: 12
Xerox Phaser 7750 Supplementary Manual preview
Phaser 7750
Brand: Xerox Pages: 16
Xerox 7760DN - Phaser Color Laser Printer Instruction Sheet preview
7760DN - Phaser Color Laser Printer
Brand: Xerox Pages: 6
Xerox Phaser 6300/DN Repacking Manual preview
Phaser 6300/DN
Brand: Xerox Pages: 3
Xerox Phaser 6360 Supplementary Manual preview
Phaser 6360
Brand: Xerox Pages: 13
Xerox DocuColor 252 Specifications preview
DocuColor 252
Brand: Xerox Pages: 8
Xerox DocuColor 242 Release Note preview
DocuColor 242
Brand: Xerox Pages: 41
Xerox Versant 3100 Press Security Manual preview
Versant 3100 Press
Brand: Xerox Pages: 45
µ-Dimension BST 1200es User Manual preview
BST 1200es
Brand: µ-Dimension Pages: 74

Brands by name

Popular brands

Load more brands