manualshive.com logo in svg

DataCard CD800S, Installation And User Manual, Page: 12 / 216

Share
Download
DataCard CD800S Installation And User Manual Download Page 12

 

2

Welcome to Card Printer Information

The card printer is available with an input hopper or with a single feed slot, and 
with or without automatic duplex. Click one of the following to view the different 
options:

• 

“Printer with Input Hopper”

 

• 

“Printer with Single-Feed Slot”

 

• 

“Printer with Duplex Option”

 

HINTS & TIPS

• 

The printer is designed to issue cards either one at a time or in batches — up 
to 100 cards at a time. An optional 200-card input hopper is available for some 
printers.

• 

A busy issuance site might issue up to 10,000 cards a month. 

• 

Often, a site will have busy times and slow times. During busy times, the site 
might use more than one printer to keep up with demand.

Printer Components

Printer with Single-Feed Slot

                                                            if

Summary of Contents for CD800S

























































































































































































































Reviews:

No comments