DataCard CD800S Installation And User Manual Download Page 87

Page: 87 / 216

104: Critical problem

Press the printer P

OWER

button or click

to power the printer off.

Request service.

HINTS & TIPS

•

The printer needs to remain off due to an internal problem.

•

Pressing either the P

OWER

button or the U

SER

button will power off the

printer.

105: Magstripe data error

The printer could not verify the magnetic stripe data written on
the card. The printer encoded data on the card but could not
verify all of the data.

To print the card again:

Insert a magnetic stripe card that matches the printer settings.

Press the U

SER

button on the printer or click “Retry” in the Message box.

HINTS & TIPS

•

The card might have been turned the wrong way.

•

The card might not have a magnetic stripe.

•

Send the new card to the printer.

Summary of Contents for CD800S

























































































































































































































Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands

DataCard CD800S, Installation And User Manual

Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands