DataCard CD800S Installation And User Manual Download Page 163

Page: 163 / 216

153

Load up to 200 cards in the hopper and close the cover. The printer is ready to
print cards.

Install the Lock Option

The lock option is a user-installed feature that does not require special tools to
install. The package contains a Kensington

Lock with keys, instructions, and a

metal security plate. The security plate is installed in the printer and is designed
to accommodate the T-bar of the Kensington lock.

Prepare the printer by installing the
metal security plate and then follow the
instructions included in the packaging.

The security plate receptacle is located
on the underside of the printer towards
the back left-hand side.

Insert the security plate into the
receptacle with the open end toward
the printer.

Follow the instructions included with
the lock to complete the installation.

Summary of Contents for CD800S

























































































































































































































Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands

DataCard CD800S, Installation And User Manual

Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands