DataCard CD800S Installation And User Manual Download Page 183

Page: 183 / 216

173

Press the E

NTER

key.

In the Please Log In:
area, enter the
Username and
Password.

•

The default
Username is
WebUser.

•

The default name
does not require a
password.

•

Your printer might require a password.

Click the

Log In

button.

The Welcome to Printer Manager page appears.

Choose the Access Level that matches your job responsibility and click the

Enter

button.

The Printer Manager confirms your request and displays the menu.

INTS

& T

IPS

•

The access level controls the information displayed and the changes that can
be made.

•

If the Browser cannot connect to the printer, make sure:

•

The printer display shows “Ready”.

•

Another user does not have a Print Manager session running.

•

WebUsers can use the Status menu to view:

•

Printer Status: Choose

Status

Printer Status

•

Card Counts: Choose

Status

Audit Data

•

Model, versions and other information about the printer: Choose

Status

VPD

•

The Supplies installed and information about them; Choose

Status

Supplies

•

For the safest printer, use the

Log Out

button in Printer Manager and close the

browser after logging out.

Summary of Contents for CD800S

























































































































































































































Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands

DataCard CD800S, Installation And User Manual

Search results

Summary of Contents for CD800S

Reviews:

Related manuals for CD800S

Brands by name

Popular brands