manualshive.com logo in svg

DataCard CD800S, Installation And User Manual, Page: 51 / 216

Share
Download
DataCard CD800S Installation And User Manual Download Page 51

41

 

Printer Sharing

This section describes how to use a printer over a network using Microsoft File 
and Printer Sharing. Shared printing includes a host PC and up to ten client PCs. 
The printer is connected to a host PC with the printer driver installed. Client PCs 
print to the shared printer over a network. Client PCs do not have the same level 
of access to the printer driver as the host PC.

• 

Printer Sharing Requirements

• 

Set Up the Host PC for Printer Sharing, Windows 7, 64-bit

• 

Install the Driver on the Client PC, Windows 7

• 

Set Up the Host PC for Printer Sharing, Windows XP, 32-bit

• 

Install the Driver on the Client PC, Windows XP, 32-bit

• 

Set Up the Host PC for Printer Sharing, Windows Server 2003, 32-bit

• 

Install the Driver on the Client PC

• 

Set up the Host PC for Printer Sharing, Windows Server 2008, 64-bit

• 

Install the Driver on the Client PC

• 

Set Up the Host PC for Printer Sharing, Windows Server 2003, 32-bit

• 

Management Tasks at the Host PC

• 

Tips for Success

Summary of Contents for CD800S

























































































































































































































Reviews:

No comments