Danfoss VLT, Programming Manual

Page: 21 / 231

Function Set-ups parameters
The Function Set-ups parameters are grouped in the following way:
Q3-1 General Settings
Q3-10 Adv. Motor Settings Q3-11 Analog Output Q3-12 Clock Settings Q3-13 Display Settings
1-90 Motor Thermal Protection 6-50 Terminal 42 Output 0-70 Date and Time 0-20 Display Line 1.1 Small
1-93 Thermistor Source 6-51 Terminal 42 Output Min Scale 0-71 Date Format 0-21 Display Line 1.2 Small
1-29 Automatic Motor Adaptation
(AMA) 6-52 Terminal 42 Output Max Scale 0-72 Time Format 0-22 Display Line 1.3 Small
14-01 Switching Frequency 0-74 DST/Summertime 0-23 Display Line 2 Large
4-53 Warning Speed High 0-76 DST/Summertime Start 0-24 Display Line 3 Large
0-77 DST/Summertime End 0-37 Display Text 1
0-38 Display Text 2
0-39 Display Text 3
Q3-2 Open Loop Settings
Q3-20 Digital Reference Q3-21 Analog Reference
3-02 Minimum Reference 3-02 Minimum Reference
3-03 Maximum Reference 3-03 Maximum Reference
3-10 Preset Reference 6-10 Terminal 53 Low Voltage
5-13 Terminal 29 Digital Input 6-11 Terminal 53 High Voltage
5-14 Terminal 32 Digital Input 6-12 Terminal 53 Low Current
5-15 Terminal 33 Digital Input 6-13 Terminal 53 High Current
6-14 Terminal 53 Low Ref./Feedb. Value
6-15 Terminal 53 High Ref./Feedb. Value
How to Programme
VLT
®
HVAC Drive Programming Guide
20 MG.11.CB.02 - VLT
®
is a registered Danfoss trademark
2 2