![Danfoss VLT Programming Manual Download Page 19](http://html1.mh-extra.com/html/danfoss/vlt/vlt_programming-manual_3511862019.webp)
NOTE
A complete description of the function is found in the
parameter sections of this manual.
130BP064.10
Q1 My Personal Menu
Q2 Quick Setup
Q3 Function Setups
Q5 Changes Made
40.0% 4.84 A 1(1)
Quick Menus
Illustration 2.5 Quick Menu view.
The Quick Setup menu gives access to the 18 most
important setup parameters of the frequency converter.
After programming the frequency converter will, in most
cases, be ready for operation. The 18 Quick Setup parameters
are shown in the table below. A complete description of the
function is given in the parameter description sections of this
manual.
Parameter
[Units]
[kW]
[HP]
[V]
[Hz]
[A]
[RPM]
[Hz]
[s]
[s]
4-11 Motor Speed Low Limit [RPM]
[RPM]
4-12 Motor Speed Low Limit [Hz]
*
[Hz]
4-13 Motor Speed High Limit [RPM]
[RPM]
4-14 Motor Speed High Limit [Hz]
*
[Hz]
[RPM]
*
[Hz]
5-12 Terminal 27 Digital Input
Table 2.1 Quick Setup parameters
*The display showing depends on choices made in
and
. The default
settings of
and
depend on which region of the world the frequency
converter is supplied to but can be re-programmed as
required.
**
, is an array, where one may choose
between Relay1 [0] or Relay2 [1]. Standard setting is Relay1
[0] with the default choice Alarm [9].
See the parameter description in the section
Commonly Used
Parameters
.
For a detailed information about settings and programming,
please see the
VLT HVAC Drive Programming Guide, MG.
11.CX.YY
x=version number
y=language
NOTE
If [No Operation] is selected in
5-12 Terminal 27 Digital Input
,
no connection to +24 V on terminal 27 is necessary to enable
start.
If [Coast Inverse] (factory default value) is selected in
5-12 Terminal 27 Digital Input
, a connection to +24V is
necessary to enable start.
2.1.6 Function Set-ups
The Function set-up provides quick and easy access to all
parameters required for the majority of VLT HVAC Drive
applications including most VAV and CAV supply and return
fans, cooling tower fans, Primary, Secondary and Condenser
Water Pumps and other pump, fan and compressor
applications.
How to access Function set-up - example
28.8%
14.4Hz
Auto Remote Running
5.66A
2.63kW
0kWh
1 (1)
130B
T110.11
Status
Illustration 2.6 Step 1: Turn on the frequency converter (yellow LED
lights)
130B
T111.10
Q1 My Personal Menu
Q2 Quick Setup
Q3 Function Setups
Q5 Changes Made
13.7% 13.0A 1(1)
Quick Menus
Illustration 2.7 Step 2: Press the [Quick Menus] button (Quick
Menus choices appear).
How to Programme
VLT
®
HVAC Drive Programming Guide
18
MG.11.CB.02 - VLT
®
is a registered Danfoss trademark
2
2