Danfoss VLT, Programming Manual

Page: 27 / 231

3.2 Main Menu - Operation and Display -
Group 0
Parameters related to the fundamental functions of the
frequency converter, function of the LCP buttons and config-
uration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display.
The frequency converter can be delivered
with 2 different language packages.
English and German are included in both
packages. English cannot be erased or
manipulated.
[0]
*
English Part of Language packages 1 - 2
[1] Deutsch Part of Language packages 1 - 2
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
[6] Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Language package 2
[20] Suomi Part of Language package 1
[22] English US Part of Language package 1
[27] Greek Part of Language package 1
[28] Bras.port Part of Language package 1
[36] Slovenian Part of Language package 1
[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 1
[42] Trad.Chinese Part of Language package 2
[43] Bulgarian Part of Language package 1
[44] Srpski Part of Language package 1
[45] Romanian Part of Language package 1
[46] Magyar Part of Language package 1
[47] Czech Part of Language package 1
[48] Polski Part of Language package 1
[49] Russian Part of Language package 1
[50] Thai Part of Language package 2
[51] Bahasa Indonesia Part of Language package 2
0-01 Language
Option: Function:
[52] Hrvatski
0-02 Motor Speed Unit
Option: Function:
This parameter cannot be adjusted while the motor is
running.
The display showing depends on settings in
0-02 Motor
Speed Unit and 0-03 Regional Settings . The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
frequency converter is supplied to, but can be re-
programmed as required.
NOTE
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
[0]
*
RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1]
*
Hz Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in
0-02 Motor Speed Unit and 0-03 Regional Settings .
The default setting of 0-02 Motor Speed Unit and
0-03 Regional Settings depends on which region
of the world the frequency converter is supplied
to but can be re-programmed as required.
[0]
*
Interna-
tional Sets 1-20 Motor Power [kW] units to [kW] and the
default value of 1-23 Motor Frequency [50 Hz].
[1] North
America Sets 1-21 Motor Power [HP] units to HP and the
default value of 1-23 Motor Frequency to 60 Hz.
The setting not used is made invisible.
Parameter Description
VLT
®
HVAC Drive Programming Guide
26 MG.11.CB.02 - VLT
®
is a registered Danfoss trademark
3 3