3.11 Main Menu - Drive Information - Group
15
Parameter group containing adjustable frequency drive
information such as operating data, hardware configu-
ration and software versions.
3.11.1 15-0* Operating Data
15-00 Operating hours
Range:
Function:
0 h
*
[0 - 0x7fffffff. h] View how many hours the adjustable
frequency drive has run. The value is
saved when the adjustable frequency
drive is turned off.
15-01 Running Hours
Range:
Function:
0 h
*
[0 - 0x7fffffff.
h]
View how many hours the motor has run.
Reset the counter in
. The value is saved when
the adjustable frequency drive is turned
off.
15-02 kWh Counter
Range:
Function:
0 kWh
*
[0 - 65535
kWh]
View the output power of the adjustable
frequency drive in kWh as a mean value
over one hour. Reset the counter in
15-03 Power Up's
Range:
Function:
0
*
[0 - 2147483647 ] View the number of times the adjustable
frequency drive has been powered up.
15-04 Over Temp's
Range:
Function:
0
*
[0 - 65535 ] View the number of adjustable frequency
drive temperature faults which have occurred.
15-05 Over Volt's
Range:
Function:
0
*
[0 - 65535 ] View the number of adjustable frequency
drive overvoltages which have occurred.
15-06 Reset kWh Counter
Option:
Function:
[0] Do not reset
[1] Reset counter Select
[1] Reset
and press [OK] to reset the
kWh counter to zero (see
NOTE!
The reset is carried out by pressing [OK].
15-07 Reset Running Hours Counter
Option:
Function:
[0] Do not reset
[1] Reset counter Select
[1] Reset counter
and press [OK] to reset
Running Hours counter (
and to zero (see also
).
3.11.2 15-3* Alarm Log
Parameters in this group are array parameters, where up to
10 fault logs can be viewed. [0] is the most recent logged
data, and [9] the oldest. Error codes, values and time
stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Range:
Function:
0
*
[0 - 255 ] View the error code and look up its meaning in
the
Troubleshooting
chapter.
Range:
Function:
0
*
[-32,767–
32,767]
View a description of the error. This
parameter is used in combination with
alarm 38 Internal Fault.
3.11.3 15-4* Drive Identification
Parameters containing read-only information about the
hardware and software configuration of the Adjustable
frequency drive.
15-40 FC Type
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the
adjustable frequency drive series power field of the
type code definition, characters 1-6.
15-41 Power Section
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the
adjustable frequency drive series power field of the
type code definition, characters 7-10.
15-42 Voltage
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the
adjustable frequency drive series power field of the
type code definition, characters 11-12.
Parameters
VLT
®
HVAC Basic Drive Programming Guide
3-52
MG18B222 - VLT
®
is a registered Danfoss trademark
3
3