Danfoss VLT HVAC Drive FC 100 Series, Programming Manual, Page: 72 / 122

13-40 Logic Rule Boolean 1
Array [6]
Option: Function:
[4] On reference See 13-01 Start Event for further
description.
[7] Out of current
range See 13-01 Start Event for further
description.
[8] Below I low See 13-01 Start Event for further
description.
[9] Above I high See 13-01 Start Event for further
description.
[16] Thermal warning See 13-01 Start Event for further
description.
[17] Mains out of range See 13-01 Start Event for further
description.
[18] Reversing See 13-01 Start Event for further
description.
[19] Warning See 13-01 Start Event for further
description.
[20] Alarm (trip) See 13-01 Start Event for further
description.
[21] Alarm (trip lock) See 13-01 Start Event for further
description.
[22] Comparator 0 Use the result of comparator 0 in the
logic rule.
[23] Comparator 1 Use the result of comparator 1 in the
logic rule.
[24] Comparator 2 Use the result of comparator 2 in the
logic rule.
[25] Comparator 3 Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1 Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2 Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3 Use the result of logic rule 3 in the
logic rule.
[30] SL Time-out 0 Use the result of timer 0 in the logic
rule.
[31] SL Time-out 1 Use the result of timer 1 in the logic
rule.
[32] SL Time-out 2 Use the result of timer 2 in the logic
rule.
13-40 Logic Rule Boolean 1
Array [6]
Option: Function:
[33] Digital input DI18 Use the value of DI18 in the logic rule
(High = TRUE).
[34] Digital input DI19 Use the value of DI19 in the logic rule
(High = TRUE).
[35] Digital input DI27 Use the value of DI27 in the logic rule
(High = TRUE).
[36] Digital input DI29 Use the value of DI29 in the logic rule
(High = TRUE).
[39] Start command This logic rule is TRUE if the adjustable
frequency drive is started by any means
(either via digital input, or other).
[40] Drive stopped This logic rule is TRUE if the adjustable
frequency drive is stopped or coasted
by any means (either via digital input,
or other).
[42] Auto Reset Trip This logic rule is TRUE if the adjustable
frequency drive is tripped (but not trip-
locked) and an automatic reset is
issued.
[50] Comparator 4 Use the result of comparator 4 in the
logic rule.
[51] Comparator 5 Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5 Use the result of logic rule 5 in the
logic rule.
[70] SL Time-out 3 Use the result of timer 3 in the logic
rule.
[71] SL Time-out 4 Use the result of timer 4 in the logic
rule.
[72] SL Time-out 5 Use the result of timer 5 in the logic
rule.
[73] SL Time-out 6 Use the result of timer 6 in the logic
rule.
[74] SL Time-out 7 Use the result of timer 7 in the logic
rule.
[83] Broken Belt A broken belt condition has been
detected. This function must be
enabled in
22-60 Broken Belt Function .
Parameters
VLT
®
HVAC Basic Drive Programming Guide
3-44 MG18B222 - VLT
®
is a registered Danfoss trademark
3 3