Danfoss VLT HVAC Drive FC 100 Series, Programming Manual, Page: 69 / 122

13-01 Start Event
Option: Function:
[23] Comparator 1 Use the result of comparator 1 in the
logic rule.
[24] Comparator 2 Use the result of comparator 2 in the
logic rule.
[25] Comparator 3 Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the logic
rule.
[27] Logic rule 1 Use the result of logic rule 1 in the logic
rule.
[28] Logic rule 2 Use the result of logic rule 2 in the logic
rule.
[29] Logic rule 3 Use the result of logic rule 3 in the logic
rule.
[33] Digital input
DI18
Use the value of DI18 in the logic rule
(High = TRUE).
[34] Digital input
DI19
Use the value of DI19 in the logic rule
(High = TRUE).
[35] Digital input
DI27
Use the value of DI27 in the logic rule
(High = TRUE).
[36] Digital input
DI29
Use the value of DI29 in the logic rule
(High = TRUE).
[39] Start command This event is TRUE if the adjustable
frequency drive is started by any means
(either via digital input, serial communi-
cation bus or other).
[40] Drive stopped This event is TRUE if the adjustable
frequency drive is stopped or coasted by
any means (either via digital input, serial
communication bus or other).
[42] Auto Reset Trip This event is TRUE if the adjustable
frequency drive is tripped (but not trip-
locked) and an automatic reset is issued.
[50] Comparator 4 Use the result of comparator 4 in the
logic rule.
[51] Comparator 5 Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the logic
rule.
[61] Logic rule 5 Use the result of logic rule 5 in the logic
rule.
[83] Broken Belt A broken belt condition has been
detected. This function must be enabled
in
22-60 Broken Belt Function .
13-02 Stop Event
Option: Function:
Select the condition (TRUE or FALSE)
which will deactivate the Smart Logic
Controller.
[0] False Enters the fixed value of FALSE in the
logic rule.
[1] True Enters the fixed value TRUE in the logic
rule.
[2] Running See 13-01 Start Event for further
description.
[3] In range See 13-01 Start Event for further
description.
[4] On reference See 13-01 Start Event for further
description.
[7] Out of current
range See 13-01 Start Event for further
description.
[8] Below I low See 13-01 Start Event for further
description.
[9] Above I high See 13-01 Start Event for further
description.
[16] Thermal warning See 13-01 Start Event for further
description.
[17] Mains out of
range
See 13-01 Start Event for further
description.
[18] Reversing See 13-01 Start Event for further
description.
[19] Warning See 13-01 Start Event for further
description.
[20] Alarm (trip) See 13-01 Start Event for further
description.
[21] Alarm (trip lock) See 13-01 Start Event for further
description.
[22] Comparator 0 Use the result of comparator 0 in the
logic rule.
[23] Comparator 1 Use the result of comparator 1 in the
logic rule.
[24] Comparator 2 Use the result of comparator 2 in the
logic rule.
[25] Comparator 3 Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1 Use the result of logic rule 1 in the
logic rule.
Parameters
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark 3-41
3 3