Danfoss VLT HVAC Drive FC 100 Series, Programming Manual, Page: 4 / 122

3.4.4 3-5* Ramp 2 3-15
3.4.5 3-8* Other Ramps 3-16
3.5 Main Menu - Limits/Warnings - Group 4
3-17
3.5.1 4-1* Motor Limits 3-17
3.5.3 4-5* Adj. Warnings 3-17
3.5.4 4-6* Speed Bypass 3-18
3.6 Main Menu - Digital In/Out - Group 5 3-20
3.6.1 5-0* Digital I/O Mode 3-20
3.6.2 5-1* Digital Inputs 3-20
3.6.4 5-4* Relays 3-26
3.6.6 5-9* Bus Controlled 3-30
3.7 Main Menu - Analog In/Out - Group 6 3-31
3.7.1 6-0* Analog I/O Mode 3-31
3.7.2 6-1* Analog Input 53 3-31
3.7.3 6-2* Analog Input 54 3-32
3.7.4 6-7* Analog/Digital Output 45 3-32
3.7.5 6-9* Analog/Digital Output 42 3-34
3.8 Main Menu - Communications and Options - Group 8
3-36
3.8.1 8-0* General Settings 3-36
3.8.2 8-3* FC Port Settings 3-36
3.8.3 8-5* Digital/Bus 3-37
3.8.4 8-7* BACnet 3-38
3.8.5 8-8* FC Port Diagnostics 3-39
3.8.6 8-9* Bus Feedback 3-39
3.9 Main Menu - Smart Logic - Group 13 3-40
3.9.1 13-** Prog. Features 3-40
3.9.2 13-0* SLC Settings 3-40
3.9.3 13-1* Comparators 3-42
3.9.4 13-2*Timers 3-43
3.9.5 13-4* Logic Rules 3-43
3.9.6 13-5* States 3-46
3.10 Main Menu - Special Functions - Group 14 3-49
3.10.1 14-0* Inverter Switching 3-49
3.10.2 14-1* >Mains Power On/Off 3-49
3.10.3 14-2* Trip Reset 3-49
3.10.4 14-4*Energy Optimizing 3-50
3.10.5 14-5* Environment 3-50
3.11 Main Menu - Drive Information - Group 15
3-52
Contents
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark