Danfoss VLT HVAC Drive FC 100 Series, Programming Manual, Page: 84 / 122

16-62 Analog Input AI53
Range: Function:
1
*
[0 - 20 ] View the actual value at input 53.
16-63 Terminal 54 Setting
Option: Function:
View the setting of input terminal 54. Current
= 0; Voltage = 1.
[0] Current mode
[1] Voltage mode
16-64 Analog Input AI54
Range: Function:
1
*
[0 - 20 ] View the actual value at input 54.
16-65 Analog Output AO42 [mA]
Range: Function:
0 mA
*
[0 - 20 mA] View the actual value at output 42 in mA.
The value shown reflects the selection in
6-90 Terminal 42 Mode and 6-91 Terminal 42
Analog Output .
16-66 Digital Output
Range: Function:
0
*
[0 -
15 ] View the binary value of all digital outputs.
Definition:
X: Not used
0: Low
1: High
XX None used
X0 Terminal 42 not used, Terminal 45
low
X1 Terminal 42 not used, Terminal 45
High
0X Terminal 42 low, Terminal 45 not
used
0 Terminal 42 low, Terminal 45 low
1 Terminal 42 low, Terminal 45 high
1X Terminal 42 high, Terminal 45 not
used
10 Terminal 42 high, Terminal 45 low
11 Terminal 42 high, Terminal 45 high
Table 3.11
16-67 Pulse Input #29 [Hz]
Range: Function:
0
*
[0 - 130000 ] View the actual frequency rate on terminal
29.
16-71 Relay Output [bin]
Range: Function:
0
*
[0 - 65535 ] View the setting of the relay.
Bits definition:
Bit 0~2 Unused
Bit 3 Relay 02
Bit 4 Relay 01
Bit 5~15 Unused
Table 3.12
16-72 Counter A
Range: Function:
0
*
[-32768 -
32767 ] View the present value of Counter A. Counters
are useful as comparator operands, see
13-10 Comparator Operand .
The value can be reset or changed either via
digital inputs (parameter group 5-1*) or by
using an SLC action (
13-52 SL Controller Action ).
Parameters
VLT
®
HVAC Basic Drive Programming Guide
3-56 MG18B222 - VLT
®
is a registered Danfoss trademark
3 3