Danfoss VLT HVAC Basic Drive FC 101, Programming Manual

Page: 91 / 104

Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
1-26 Motor Cont. Rated Torque ExpressionLimit All set-ups FALSE -1 Uint32
1-29 Automatic Motor Adaption (AMA) [0] Off 1 set-up FALSE - Uint8
1-3* Adv. Motor Data
1-30 Stator Resistance (Rs) ExpressionLimit All set-ups FALSE -3 Uint32
1-33 Stator Leakage Reactance (X1) ExpressionLimit All set-ups FALSE -3 Uint32
1-35 Main Reactance (Xh) ExpressionLimit All set-ups FALSE -2 Uint32
1-37 d-axis Inductance (Ld) ExpressionLimit All set-ups FALSE -3 Int32
1-39 Motor Poles 4 N/A All set-ups FALSE 0 Uint8
1-4* Adv. Motor Data II
1-40 Back EMF at 1000 RPM ExpressionLimit All set-ups FALSE 0 Uint16
1-42 Motor Cable Length 50 m All set-ups FALSE 0 Uint8
1-43 Motor Cable Length Feet 164 ft All set-ups FALSE 0 Uint16
1-5* Load Indep. Setting
1-50 Motor Magnetisation at Zero Speed 100 % All set-ups TRUE 0 Uint16
1-52 Min Speed Normal Magnetising [Hz] 0 Hz All set-ups TRUE -1 Uint16
1-55 U/f Characteristic - U ExpressionLimit All set-ups FALSE -1 Uint16
1-56 U/f Characteristic - F ExpressionLimit All set-ups FALSE -1 Uint16
1-6* Load Depen. Setting
1-60 Low Speed Load Compensation 100 % All set-ups TRUE 0 Uint16
1-61 High Speed Load Compensation 100 % All set-ups TRUE 0 Uint16
1-62 Slip Compensation 0 % All set-ups TRUE 0 Int16
1-63 Slip Compensation Time Constant 0.1 s All set-ups TRUE -2 Uint16
1-64 Resonance Dampening 100 % All set-ups TRUE 0 Uint16
1-65 Resonance Dampening Time Constant 0.005 s All set-ups TRUE -3 Uint16
1-66 Min. Current at Low Speed 50 % All set-ups TRUE 0 Uint32
1-7* Start Adjustments
1-71 Start Delay 0 s All set-ups TRUE -1 Uint8
1-72 Start Function [2] Coast/delay time All set-ups TRUE - Uint8
1-73 Flying Start [0] Disabled All set-ups FALSE - Uint8
1-8* Stop Adjustments
1-80 Function at Stop [0] Coast All set-ups TRUE - Uint8
1-82 Min Speed for Function at Stop [Hz] 0 Hz All set-ups TRUE -1 Uint16
1-9* Motor Temperature
1-90 Motor Thermal Protection ExpressionLimit All set-ups TRUE - Uint8
1-93 Thermistor Source [0] None All set-ups FALSE - Uint8
Parameter Lists
VLT
®
HVAC Basic Drive FC 101 Programming Guide
MG18B302 - Rev. 2013-09-02 89
5 5