2.7.5 5-4* Relays
Parameters for configuring the timing and the output functions for the relays.
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Select options to define the function of the relays.
The selection of each mechanical relay is realized in an array parameter.
[0] *
No Operation
[1]
Control Ready
[2]
Drive Ready
[3]
Drive Ready/Remote
[4]
Stand-by/No Warning
[5]
Running
[6]
Running/No Warning
[8]
Run on Ref./No Warning
[9]
Alarm
[10]
Alarm or Warning
[11]
At Torque Limit
[12]
Out of Current Range
[13]
Below Current, low
[14]
Above Current, high
[15]
Out of Speed Range
[16]
Below Speed, low
[17]
Above Speed, high
[18]
Out of Feedb. Range
[19]
Below Feedback, low
[20]
Above Feedback, high
[21]
Thermal Warning
[25]
Reverse
[26]
Bus OK
[27]
Torque Limit & Stop
[28]
Brake, No Warning
[29]
Brake Ready, No Fault
[30]
Brake Fault (IGBT)
[35]
External Interlock
[36]
Control Word Bit 11
[37]
Control Word Bit 12
[40]
Out of Ref. Range
[41]
Below Reference, low
[42]
Above Ref. high
[45]
Bus ctrl
[46]
Bus ctrl, 1 if timeout
[47]
Bus ctrl, 0 if timeout
[60]
Comparator 0
[61]
Comparator 1
2 Parameter Description
VLT
®
AQUA Drive Programming Guide
78
MG.20.O4.02 - VLT
®
is a registered Danfoss trademark
2