manualshive.com logo in svg

Danfoss FC 300, Design Manual

Share
Download
Danfoss FC 300 Design Manual Download Page 257

11.6 Modbus RTU Overview 

11.6.1 Assumptions

This instruction manual assumes that the installed controller supports the interfaces in this document and that all the requirements stipulated in the
controller, as well as the adjustable frequency drive, are strictly observed, along with all limitations therein.

 

11.6.2 What the User Should Already Know

The Modbus RTU (Remote Terminal Unit) is designed to communicate with any controller that supports the interfaces defined in this document. It is
assumed that the user has full knowledge of the capabilities and limitations of the controller.

 

11.6.3 Modbus RTU Overview

Regardless of the type of physical communication networks, the Modbus RTU Overview describes the process a controller uses to request access to
another device. This includes, among other things, how it will respond to requests from another device, and how errors will be detected and reported.
It also establishes a common format for the layout and contents of message fields.
While communicating over a Modbus RTU network, the protocol determines how each controller will learn its device address, recognize a message
addressed to it, determine the kind of action to be taken and extract any data or other information contained in the message. If a reply is required, the
controller will construct the reply message and send it.
Controllers communicate using a master-slave technique in which only one device (the master) can initiate transactions (called queries). The other devices
(slaves) respond by supplying the requested data to the master or taking the action requested in the query.
The master can address individual slaves or initiate a broadcast message to all slaves. Slaves return a message (called a response) to queries that are
addressed to them individually. No responses are returned to broadcast queries from the master. The Modbus RTU protocol establishes the format for
the master’s query by placing into it the device (or broadcast) address, a function code defining the requested action, any data to be sent and an error-
checking field. The slave’s response message is also constructed using Modbus protocol. It contains fields confirming the action taken, any data to be
returned and an error-checking field. If an error occurs in receipt of the message, or if the slave is unable to perform the requested action, the slave will
construct an error message and send it in response, or a timeout will occur.

FC 300 Design Guide

11 RS-485 Installation and Set-up

MG.33.BC.22 - VLT

®

 is a registered Danfoss trademark

11-11

  11

Summary of Contents for FC 300

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands