Danfoss ECL 2000, User Manual

Page: 79 / 106

Service Settings
EY.65.H4.02
73
10.4.10 Energy Consumption
Sensor input When energy consumption is being measured by a sensor connected to one of the sen-
sor inputs S8, S9, S10 or S11), the following picture displays the energy consumption
and allows you to reset the measurement:
Display text Parameter Default value,
range Description
Accum.
Accumulated Range:
0-9999 MWh
or
0-9999 GWh The accumulated energy consumption
Energy Range:
0-999 kW or
0-999 MW The currently measured energy con-
sumption. This parameter is read-only
and cannot be modified
Reset
Select this parameter and press to
reset the accumulated energy consump-
tion to 0. A new calculation of the accu-
mulated value is started
LON input When energy consumption is being measured by a device connected to the ECL 2000
via LON, the following picture displays the measured energy consumption:
Display text Parameter Default value,
range Description
Accum. Accumulated Range:
0-9999 MWh
or
0-9999 GWh Read-only parameter. The accumulated
energy consumption
Energy Range:
0-999 kW or
0-999 MW Read-only parameter. The currently
measured energy consumption
Note:
When energy consumption is being measured by a device connected via LON, the ac-
cumulated consumption cannot be reset. This is due to the fact that the accumulated
energy consumption is calculated by the device and transmitted to the ECL 2000.