Danfoss ECL 2000, User Manual

Page: 104 / 106

Index
EY.65.H4.02
98
slope, 44
starting time, 42
stopping time, 42
outdoor temperature, 41
outdoor temperature, 10
output
configuring, 27
override, 68
P
P3
alarm setup, 66
party function, 4, 16, 90
password. See access code
PI constant settings
heat circuit, 47
hot-water circuit, 58
PI controller, 91
poll, 32
pre-heat method, 44
pre-heat period, 43, 90
calculated, 43
default, 43
maximum, 43
previous
alarm status, 65
principles of operation, 5
priority, 68
proportional band, 91
proportional band, flow temp.
heat circuit, 47
hot-water circuit, 58
Pt 1000, 91
pump
manual operation, 36
status, 13
pump exercise
heat circuit, 45
pump function
hot-water circuit, 56
pump overrun
heat circuit, 45
hot-water circuit, 56
pump prerun
hot-water circuit, 56
pump settings
heat circuit, 45
hot-water circuit, 56
pump/valve settings
heat circuit, 45
hot-water circuit, 56
purpose, 1
push-buttons
function, 6
overview, 6
R
relay output
configuring, 28, 33
function, 33
return temperature
weather compensation, 23
return temperature curve, 21
return temperature limiter
heat circuit, 47, 48
hot-water circuit, 58, 59
outdoor temperature dependant, 21
room influence, 48, 91
room temperature, 10, 41
running time 1 mm
heat circuit, 46
hot-water circuit, 57
S
safety thermostat, 69
scaling, 31
selecting
application, 26
circuit, 12
sensor, 30, 32
sensor input
amplification, 31
circuit, 30
configuring, 27, 30
interval, 31
offset, 31
scaling, 31
sensor, 30
type, 31
sensor time constant, 71
service menu, 38
building settings, 41
common functions, 62
heat circuit settings, 41
hot water settings, 52
limiter settings, 48, 59
next/previous picture, 39
operation, 39
override, 68
PI constant settings, 47, 58
pump/valve settings, 45, 56
selecting menu item, 39
selecting parameter, 39
set clock, 64
service menus
common functions, 83
heat circuit, 81
hot-water circuit, 82
overview, 81
service pin, 70
service settings, 91