Daikin VRV IV-S RXTQ-TAVJU Series, Service Manual

Page: 96 / 272

Field Setting from Remote Controller SiUS331604E
83 Field Setting
2.3 Setting Contents and Code No. for Indoor Units
: Factory setting
Mode
No.
(
∗
2)
First
Code
No.
Description Second Code No. Details
No.
01 02 03 04
10(20) 0 Filter contamination heavy/light
(Setting for display time to clean air
filter)
(Sets display time to clean air filter
to half when there is heavy filter
contamination.) Ultra
long life
filter Light Approx.
10,000
hrs.
Heavy Approx.
5,000
hrs.
— — (1)
Long life
filter Approx.
2,500
hrs.
Approx.
1,250
hrs.
Standard
filter Approx.
200 hrs.
Approx.
100 hrs.
0 (
∗
6) Filter Sign Setting Light Heavy — —
1 Long life filter type Long life filter Ultra long life filter — —
(2)
1 (
∗
6) Filter cleaning sign time (Light/Heavy) 2,500/1,250 10,000/5,000 — —
2 Room temperature thermistor in remote
controller Remote
cont
Suction air
thermistor
Only suction air
thermistor
Only remote
controller
thermistor
— (3)
2 (
∗
6)
Remote sensor and remote controller
thermistor
Both
Only remote
sensor thermistor
Only remote
controller
thermistor
—
3 Display time to clean air filter calculation (Set
when filter sign is not to be displayed.) Display No display — —
(4)
6 Remote controller thermostat control during
group control Remote
controller
thermostat
control is not
permitted
Remote
controller
thermostat
control is
permitted
— — (5)
7 Auxiliary electric heater ON/OFF temperature Refer to page 88. (6)
11(21)
1
Auxiliary electric heater ON temperature: Ttson
(
∗
8)
Refer to page 88.
2
Auxiliary electric heater OFF temperature:
Ttsoff (
∗
8)
3 Setting the airflow rate when heating Standard Slightly
increased
Increased
—
(7)
6 Setting the rate of human detection High sensitivity Low sensitivity Standard
sensitivity
Infrared
presence
sensor
disabled
(8)
7 Airflow adjustment OFF Completion of
airflow
adjustment
Start of
airflow
adjustment
— (9)
8 Compensating the temperature around people Suction air
temperature only
Priority given on
the suction air
temperature
Standard Priority given
on the floor
temperature
(10)
9 Compensating the floor temperature –4°C
(–7.2°F)
–2°C
(–3.6°F)
0°C
(0°F)
+2°C
(+3.6°F)
(11)
12(22) 0 Optional accessories output selection (field
selection of output for adaptor for wiring)
Refer to page 90.
(12)
1 External ON/OFF input (Set when ON/OFF is
to be controlled from outside.)
Refer to page 90.
(13)
2 Thermostat differential changeover
(Set when remote sensor is to be used.) 1°C
(1.8°F)
0.5°C
(0.9°F)(
∗
7)
— — (14)
3 Airflow setting when heating thermostat is OFF LL Set fan speed — — (15)
4 Automatic mode differential Refer to page 91. (16)
5 Power failure automatic reset Not equipped Equipped — — (17)
6 Airflow setting when cooling thermostat is OFF LL Set fan speed — — (18)