Daikin RXYQ-TA Series, Service Manual

Page: 117 / 337

SiUS341615E Field Setting from Remote Controller
Field Settings 104
„
When the unit is equipped with an infrared floor sensor:
∗
Refer to Compensating the temperature around people.
Note that the control is automatically switched to the one performed only by the suction air thermistor for indoor
unit when the Second code No. is
01 during group control.
To use the remote controller thermistor during group control, select the Second code No. 02 in First code No. 6 .
Mode No. First Code No. Second Code No. Contents
10 (20) 6
01 Remote controller thermostat control is not permitted during group control.
02 Remote controller thermostat control is permitted during group control.
20
22
24
26
28
30
32
34
36
21 19 17 23 25 27 29 31 33 35 37 (˚C)
(˚C)
14
16
18
20
22
24
26
28
30
32
(˚C)
(˚C)
68
71.6
75.2
78.8
82.4
86
89.6
93.2
96.8
57.2
60.8
64.4
68
71.6
75.2
78.8
82.4
86
89.6
(˚F)
(˚F)
14 16 18 20 22 24 26 28 30 32 34
66.2 62.6 69.8 73.4 77 80.6 84.2 87.8 91.4 95 98.6 (˚F)
(˚F) 57.2 60.8 64.4 68 71.6 75.2 78.8 82.4 86 89.6 93.2
In cooling
In heating
Suction air temperature
Suction air temperature
Suction air
thermistor Suction air
thermistor
Suction air
thermistor
Suction air
thermistor
Suction air
thermistor
Suction air
thermistor
Suction air
thermistor
Suction air
thermistor
Remote controller
thermistor
Remote controller
thermistor
Remote controller
thermistor
Remote controller
thermistor
Set temper
ature
Set temper
ature
Mode No. Second Code No.
10 (20) 2 01 02 02 02 02 03
11 (21) 8 01 01 02 03 04 01
The thermistor to be used
Remote controller thermistor
9
— — — —
9
Suction air thermistor
9 9 9 9 9
—
Infrared floor sensor — —
9 9 9
—
First Code No.
The infrared floor
sensor is not used
Priority given to
the suction air
temperature (
∗
)
Only the remote
controller thermistor
is used
Priority given to the
floor temperature (
∗
)
Only the suction air
thermistor is used
Standard setting
(Factory setting)