Daedong KIOTI CS2610, Manual

Page: 167 / 192

7
7
-
maintenance
To avoid accidents:
Do not remove the radiator
cap while the coolant is hot.
you can be burned by hot
steam. Make sure to remove
radiator cap after the coolant
is cooled down enough.
Even though the coolant has
cooled down, turn the cap to
its first stop and then wait un -
til it has depressurized before
removing the cap completely.
•
•
CAUTION
Do not start engine without
coolant.
Use clean, fresh water and
anti-freeze to fill the radiator
and reservoir tank.
When the anti-freeze is mixed
with water, the anti-freeze mix -
ing ratio must be less than
50%.
Securely tighten radiator cap.
If the cap is loose or improp -
erly fitted, water may leak out
and the engine could over-
heat.
If the radiator cap has to be
removed, follow the caution
above and securely retighten
the cap.
Use clean fresh water and
anti-freeze to fill the reservoir
tank.
If the coolant leaks, contact
your local kIOTI Dealer.
•
•
•
•
•
•
•
IMPORTANT
ANTI-fREEzE
* at 760 mmhg pressure (atmo-
spheric) a higher boiling point is
obtained by using a radiator pres-
sure cap.
This tractor is filled with 50% of eth -
ylene glycol at factory.
if the anti-freeze has been replaced
by tap water later on, the coolant can
be frozen, leading to damage to the
cylinder and radiator when the ambi-
ent temperature is below 0°c.
therefore, make sure to change
water into anti-freeze before winter
season comes.
when changing the anti-freeze with
one of another type, flush the cooling
system several times and contact a
professional for the mixture ratio.
Vol. %
Anti-freeze
freezing
Point
Boiling
Point*
°f °C °f °C
40 -12 -24 222 106
50 -34 -37 226 108
M46-EU,AU-EEC인증용-07.indd 33 2017-04-25 오후 5:00:10