D-Link xStack Storage DSN-4000 Series, Software User'S Manual

Page: 61 / 158

xStack Storage Management Center Software User’s Guide 51
4.3 Performing Volume Actions
After you create volumes, you can use the Volume Actions panel to perform the following
activities:
Grant or revoke volume access to iSCSI initiators. See section 4.3.1.
Scan a volume. See section 4.3.2.
Destroy a volume. See section 4.3.3.
Grow a volume. See section 4.3.4.
Reconfigure a volume. See section 4.3.5.
Show advanced extents in the Extents tab. See section 4.4.2.
4.3.1 Modifying iSCSI Initiator Access to Volumes
During the volume creation process, you can grant or revoke volume access to iSCSI
initiators. To change this setting, use the following procedure and record your settings in
Table C-2.
1. In the Volume View, click a volume in the Main Display.
2. Perform one of the following steps:
–
On the Volumes menu, click Modify Initiator Access .
–
Click Modify Initiator Access in the Volume Actions panel.
–
Press the right mouse button and click
Modify Initiator Access
from the shortcut
menu.
–
Click the Initiator Access tab.
Any of these steps displays the Initiator Access tab (see Figure 4-21).
Figure 4-21. Initiator Access Tab