D-Link xStack Storage DSN-4000 Series, Software User'S Manual

Page: 123 / 158

xStack Storage Management Center Software User’s Guide 113
Figure 7-10. IP Address that Belongs to a VLAN-Enabled Group
7.5.2 Ungrouping Ports
If you want to ungroup the ports in a LAG:
1. In the Network Settings View of the Main Display, click a LAG.
2. Perform one of the following steps:
–
On the Network menu, click Ungroup Ports.
–
In the Network Actions panel, click Ungroup Ports.
–
Press the right mouse button and click Ungroup Ports from the shortcut menu.
Any of these steps will ungroup the ports in the selected group.
3. Record your settings in Table C-3.
7.5.3 Removing Ports from a LAG
If you no longer need ports in a LAG, you can remove the ports from the LAG.
1. In the Network Settings View of the Main Display, click an Ethernet port that belongs to
a LAG.
This “V” Indicates That
the IP Address Selected
in the Main Display is
VLAN Enabled