D-Link xStack Storage DSN-4000 Series, Software User'S Manual

Page: 45 / 158

xStack Storage Management Center Software User’s Guide 35
Chapter 4 Managing Volumes
This chapter describes how to manage volumes on an xStack Storage. A volume is a set of
storage blocks organized and presented for use by a customer’s server (an iSCSI initiator
node). The iSCSI initiator node sees the volume as a contiguous series of numbered blocks,
called Virtual Logical Block Numbers (VLBNs), in the same way that it would see the storage
space on a single disk drive. The xStack Storage builds a volume from extents. A volume
typically consists of extents from several drives.
Volumes are managed in the Volume View. Volume View is the initial view that appears
when you log in to the xStack Storage Management Center. If you are in a different console
view, you can display the Volume View by performing any of the following steps:
Clicking Volume on the View menu.
Clicking an xStack Storage IP address in the View panel.
Clicking the Volume View button on the toolbar:
The topics covered in this chapter are:
Section 4.1, Understanding the Volume View
Section 4.2, Creating Volumes
Section 4.3, Performing Volume Actions
Section 4.4, Using the Detail Tabs
Section 4.5 Removing iSCSI Initiators