D-Link xStack DES-3810 Reference Manual Download Page 65

Page: 65 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

User-based Security
Model

SNMPv1

– Specifies that SNMP version 1 will be used.

SNMPv2

– Specifies that SNMP version 2 will be used.

SNMPv3

– Specifies that SNMP version 3 will be used.

Security Level

NoAuthNoPriv

– To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv

security level.

AuthNoPriv

– To specify that the SNMP version 3 will be used, with an Auth-NoPriv

security level.

AuthPriv

– To specify that the SNMP version 3 will be used, with an Auth-Priv security

level.

Community String /
SNMP V3 User Name

Type in the community string or SNMP V3 user name as appropriate.

Click the

Apply

button to accept the changes made.

Click the

Delete

button to remove the specific entry.

RMON Settings

On this page the user can enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for

the SNMP function on the Switch.

To view the following window, click

Management > SNMP Settings > RMON Settings

, as shown below:

Figure 3-45 RMON Settings window

The fields that can be configured are described below:

Parameter

Description

RMON Rising Alarm
Trap

Enable this option to use the RMON Rising Alarm Trap Feature.

RMON Falling Alarm
Trap

Enable this option to use the RMON Falling Alarm Trap Feature.

Click the

Apply

button to accept the changes made.

Telnet Settings

Users can configure Telnet Settings on the Switch.

To view the following window, click

Management > Telnet Settings

, as shown below:

Figure 3-46 Telnet Settings window

The fields that can be configured are described below:

Summary of Contents for xStack DES-3810






























































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DES-3810

Reviews:

Related manuals for xStack DES-3810

Brands by name

Popular brands

D-Link xStack DES-3810, Reference Manual

Search results

Summary of Contents for xStack DES-3810

Reviews:

Related manuals for xStack DES-3810

Brands by name

Popular brands