xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
118
IGMP Router Port
Users can display which of the Switch’s ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S. A
router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F.
To view the following window, click
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Router Port
, as
shown below:
Figure 5-57 IGMP Router Port window
The fields that can be configured are described below:
Parameter
Description
VID
Enter a VLAN ID to be displayed.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
NOTE: The abbreviations used in this window are
Static Router Port (S)
,
Dynamic Router Port (D)
and
Forbidden Router Port (F)
.
IGMP Snooping Group
Users can view the Switch’s IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast
Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Group
, as shown below:
Figure 5-58 IGMP Snooping Group window
Summary of Contents for xStack DES-3810
Page 1: ......
