manualshive.com logo in svg

D-Link xStack DES-3810, Reference Manual

The D-Link xStack DES-3810 is a high-performance network switch designed for large-scale businesses. Its comprehensive Reference Manual provides detailed instructions for optimal utilization. You can easily download this manual for free from our website, ensuring effortless setup and configuration for your network infrastructure.

Share
Download
background image

xStack

® 

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

 

459 

 

portNum: Represents the logical port number of the MEP. 

mepdirection: Represents the direction of the MEP. This can be "inward" or 

"outward". 

mepid: Represents the MEPID of the MEP. 

 

Event description: LCK condition detected 

Log Message: [CFM_EXT(3):]LCK condition detected. MD Level:<mdlevel>, 

VLAN:<vlanid>, Local(Port <portNum>, Direction:<mepdirection>, 

MEPID:<mepid>) 

 

Parameters description: 

vlanid: Represents the VLAN identifier of the MEP. 

mdlevel: Represents the MD level of the MEP. 

portNum: Represents the logical port number of the MEP. 

mepdirection: Represents the direction of the MEP. This can be "inward" or 

"outward". 

mepid: Represents the MEPID of the MEP. 

Notice 

 

 

Event description: LCK condition cleared 

Log Message: [CFM_EXT(4):]LCK condition cleared. MD Level:<mdlevel>, 

VLAN:<vlanid>, Local(Port <portNum>, Direction:<mepdirection>, 

MEPID:<mepid>) 

 

Parameters description: 

vlanid: Represents the VLAN identifier of the MEP. 

mdlevel: Represents the MD level of the MEP. 

portNum: Represents the logical port number of the MEP. 

mepdirection: Represents the direction of the MEP. This can be "inward" or 

"outward". 

mepid: Represents the MEPID of the MEP. 

Notice 

 

DULD 

Event description: A unidirectional link has been detected on this port 

Log Message: Port: <portNum> is unidirectional. 

 

Parameters description: 

portNum: port number 

Informational 

 

SRM 

Event Description: SRM mode change 

Log Message: The SRM mode has been changed to <srm_mode> 

 

Parameters Description: 

srm_mode: the SRM mode, could be Routing or VPWS 

Informational 

 

RADIUS 

Event description: VID assigned from RADIUS server after RADIUS client is 

authenticated by RADIUS server successfully .This VID will be assigned to the 

port and this port will be the VLAN untagged port member. 

Log Message: RADIUS server <ipaddr>  assigned VID :<vlanID>  to port  

<portNum> (account :<username> ) 

 

Parameters description: 

ipaddr: The IP address of the RADIUS server. 

vlanID: The VID of RADIUS assigned VLAN. 

portNum: The port number. 

Username: The user that is being authenticated. 

Informational 

 

 

Event description: Ingress bandwidth assigned from RADIUS server after 

RADIUS client is authenticated by RADIUS server successfully .This Ingress 

bandwidth will be assigned to the port. 

Log Message: RADIUS server <ipaddr>  assigned ingress 

bandwith :<ingressBandwidth> to port  <portNum> (account : <username>) 

 

Parameters description: 

ipaddr: The IP address of the RADIUS server. 

ingressBandwidth: The ingress bandwidth of RADIUS assign. 

portNum: The port number. 

Username: The user that is being authenticated. 

Informational 

 

 

Event description: Egress bandwidth assigned from RADIUS server after 

RADIUS client is authenticated by RADIUS server successfully .This egress 

bandwidth will be assigned to the port. 

Log Message: RADIUS server <ipaddr>  assigned egress 

bandwith :<egressBandwidth> to  port  <portNum> (account: <username>) 

 

Parameters description: 

ipaddr: The IP address of the RADIUS server. 

egressBandwidth: The egress bandwidth of RADIUS assign. 

portNum: The port number. 

Username: The user that is being authenticated. 

Informational 

 

 

Event description: 802.1p default priority assigned from RADIUS server after 

RADIUS client is authenticated by RADIUS server successfully. This 802.1p 

default priority will be assigned to the port. 

Log Message: RADIUS server <ipaddr>  assigned 802.1p default 

priority:<priority> to  port  <portNum> (account : <username>) 

 

Parameters description: 

ipaddr: The IP address of the RADIUS server. 

priority: Priority of RADIUS assign. 

Informational 

 

Summary of Contents for xStack DES-3810






























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3810

D-Link ShareCenter DNS-320L Datasheet preview
ShareCenter DNS-320L
Brand: D-Link Pages: 4
GE MDS SD Series Setup Manual preview
MDS SD Series
Brand: GE Pages: 4
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual preview
4-Port 10/100Mbps Ethernet Broadband Router
Brand: AOpen Pages: 41
Talent LT804-A Quick Installation Manual preview
LT804-A
Brand: Talent Pages: 18
Comway 4G DTU Configuration Instructions preview
4G DTU
Brand: Comway Pages: 20
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
Digi 9P 9360/9750 User Manual preview
9P 9360/9750
Brand: Digi Pages: 75
Optus Ultra WiFi Booster Quick Manual preview
Ultra WiFi Booster
Brand: Optus Pages: 8
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Brand: Riverbed Pages: 140
Asante IntraSwitch 5324MT Quick Installation Manual preview
IntraSwitch 5324MT
Brand: Asante Pages: 2
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Brand: QSC Pages: 13
Rajant BreadCrumb ES1 User Manual preview
BreadCrumb ES1
Brand: Rajant Pages: 93
3Com 3C13755-US - Router 5642 Installation Manual preview
3C13755-US - Router 5642
Brand: 3Com Pages: 104
LevelOne FUS-3100 Quick Installation Manual preview
FUS-3100
Brand: LevelOne Pages: 61
GarrettCom Magnum mP62-5V -1M1SSC Installation And User Manual preview
Magnum mP62-5V -1M1SSC
Brand: GarrettCom Pages: 40
UltrArmor UA3 Series User Manual preview
UA3 Series
Brand: UltrArmor Pages: 3

Brands by name

Popular brands

Load more brands