D-Link xStack DES-3810, Reference Manual, Page: 272 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
259
Figure 8-27 Add CPU Access Rule window (Ethernet ACL)
The fields that can be configured are described below:
Parameter Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
.
VLAN Name
Enter the VLAN name used here.
VLAN ID
Enter the VLAN ID used here.
VLAN Mask
Select and enter the VLAN mask value used here.
Source MAC Address
Enter the source MAC address used here.
Source MAC Address
Mask
Select and enter the source MAC address mask used here.
Destination MAC
Address
Enter the destination MAC address used here.
Destination MAC
Address Mask
Select and enter the destination MAC address mask used here.
802.1p
Enter the 802.1p priority tag value used here. This value must be between 0 and 7.
Ethernet Type
Enter the Ethernet type value used here.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by
the Switch, according to any additional rule added (see below).