xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
454
[<ipaddr> | <ipv6addr>]], MAC :< macaddr >, Port <portNum >).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static NDP
Log Message: Dynamic IMPB entry conflicts with static NDP (IP: [< ipaddr > | <
ipv6addr >], MAC: <macaddr>, Port <portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
portNum : The port number
Warning
BPDU Attack
Protection
Event description: BPDU attack happened.
Log Message: Port <portNum> enter BPDU under protection state (mode: drop |
block | shutdown)
Parameters description:
portNum : The port number
drop / block / shutdown: There only one of they in a log entry.
Informational
Event description: BPDU attack automatically recover.
Log Message: Port <portNum > recover from BPDU under protection state
automatically
Parameters description:
portNum : The port number
Informational
Event description: BPDU attack manually recover.
Log Message: Port <portNum > recover from BPDU under protection state
manually
Parameters description:
portNum : The port number
Informational
WAC
Event description: When a client host fail to authenticate.
Log Message: WAC unauthenticated user (Username: <string>, IP: <ipaddr>,
MAC: <macaddr>, Port: <portNum>)
Parameters description:
string: Username
ipaddr: IP address
macaddr: MAC address
portNum : The port number
Warning
Event description: This log will be triggered when the authorized user number
reaches the max user limit on whole device.
Log Message: WAC enters stop learning state.
Warning
Event description: This log will be triggered when the authorized user number is
below the max user limit on whole device in a time interval (interval is project
depended).
Log Message: WAC recovers from stop learning state.
Warning
JWAC
Event description: When a client host authenticated successful.
Log Message: JWAC authenticated user (Username: <string>, IP: <ipaddr>,
MAC: <macaddr>, Port: <portNum>)
Parameters description:
string: Username
ipaddr: IP address
macaddr: MAC address
portNum : The port number
Warning
Event description: When a client host fail to authenticate.
Log Message: JWAC unauthenticated user (Username: <string>, IP: <ipaddr>,
MAC: <macaddr>, Port: <portNum>).
Parameters description:
string: Username
ipaddr: IP address
macaddr: MAC address
portNum : The port number
Warning
Event description: This log will be triggered when the authorized user number
reaches the max user limit on whole device.
Log Message: JWAC enters stop learning state.
Warning
Event description: This log will be triggered when the authorized user number is
below the max user limit on whole device in a time interval (interval is project
depended).
Log Message: JWAC recovers from stop learning state.
Warning
LBD
Event Description: Loop back is detected under port-based mode.
Log Message: Port < portNum> LBD loop occurred. Port blocked.
Parameters Description:
Critical
Summary of Contents for xStack DES-3810
Page 1: ......
