manualshive.com logo in svg

D-Link xStack DES-3810, Reference Manual

The D-Link xStack DES-3810 is a high-performance network switch designed for large-scale businesses. Its comprehensive Reference Manual provides detailed instructions for optimal utilization. You can easily download this manual for free from our website, ensuring effortless setup and configuration for your network infrastructure.

Share
Download
background image

xStack

® 

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide 

 

272 

trTCM

 – Two Rate Three Color Marker. This, along with the srTCM, are two methods available on the switch for 

metering and marking packet flow. The trTCM meters and IP flow and marks it as a color based on the flow’s 

surpassing of two rates, the CIR and the PIR. 

CIR

 – Committed Information Rate. Common to both the trTCM and the srTCM, the CIR is measured in bytes of IP 

packets. IP packet bytes are measured by taking the size of the IP header but not the link specific headers. For the 

trTCM, the packet flow is marked green if it doesn’t exceed the CIR and yellow if it does. The configured rate of the 

CIR must not exceed that of the PIR. The CIR can also be configured for unexpected packet bursts using the CBS 

and PBS fields. 

CBS

 – Committed Burst Size. Measured in bytes, the CBS is associated with the CIR and is used to identify packets 

that exceed the normal boundaries of packet size. The CBS should be configured to accept the biggest IP packet that 

is expected in the IP flow.  

PIR

 – Peak Information Rate. This rate is measured in bytes of IP packets. IP packet bytes are measured by taking 

the size of the IP header but not the link specific headers. If the packet flow exceeds the PIR, that packet flow is 

marked red. The PIR must be configured to be equal or more than that of the CIR. 

PBS

 – Peak Burst Size. Measured in bytes, the PBS is associated with the PIR and is used to identify packets that 

exceed the normal boundaries of packet size. The PBS should be configured to accept the biggest IP packet that is 

expected in the IP flow. 

srTCM

 – Single Rate Three Color Marker. This, along with the trTCM, are two methods available on the switch for 

metering and marking packet flow. The srTCM marks its IP packet flow based on the configured CBS and EBS. A 

packet flow that does not reach the CBS is marked green, if it exceeds the CBS but not the EBS its marked yellow, 

and if it exceeds the EBS its marked red. 

CBS

 – Committed Burst Size. Measured in bytes, the CBS is associated with the CIR and is used to identify packets 

that exceed the normal boundaries of packet size. The CBS should be configured to accept the biggest IP packet that 

is expected in the IP flow. 

 

EBS

 – Excess Burst Size. Measured in bytes, the EBS is associated with the CIR and is used to identify packets that 

exceed the boundaries of the CBS packet size. The EBS is to be configured for an equal or larger rate than the CBS. 

DSCP

 – Differentiated Services Code Point. The part of the packet header where the color will be added. Users may 

change the DSCP field of incoming packets. 
 
The ACL Flow Meter function will allow users to color code IP packet flows based on the rate of incoming packets. 

Users have two types of Flow metering to choose from, trTCM and srTCM, as explained previously. When a packet 

flow is placed in a color code, the user can choose what to do with packets that have exceeded that color-coded rate.  

Green

 – When an IP flow is in the green mode, its configurable parameters can be set in the Conform field, where the 

packets can have their DSCP field changed. This is an acceptable flow rate for the ACL Flow Meter function. 

Yellow

 – When an IP flow is in the yellow mode, its configurable parameters can be set in the Exceed field. Users 

may choose to either Permit or Drop exceeded packets. Users may also choose to change the DSCP field of the 

packets.  

Red

 – When an IP flow is in the red mode, its configurable parameters can be set in the Exceed field. Users may 

choose to either Permit or Drop exceeded packets. Users may also choose to change the DSCP field of the packets. 
 
Users may also choose to count exceeded packets by clicking the Counter check box. If the counter is enabled, the 

counter setting in the access profile will be disabled. Users may only enable two counters for one flow meter at any 

given time. 
 
To view this window, click 

ACL

 > 

ACL Flow Meter

, as shown below. 

 

Figure 8-45 ACL Flow Meter window 

 
The fields that can be configured are described below: 

Summary of Contents for xStack DES-3810






























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3810

H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Brand: H3C Pages: 60
H3C MSR 20 Series Manual preview
MSR 20 Series
Brand: H3C Pages: 149
3Com 3C13636 Installation Manual preview
3C13636
Brand: 3Com Pages: 27
3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Brand: 3Com Pages: 52
Eaton INDGW-X2 Manual preview
INDGW-X2
Brand: Eaton Pages: 10
National Instruments Module NI PXI-8250 User Manual preview
Module NI PXI-8250
Brand: National Instruments Pages: 39
Salusfin SF-930EU User'S Installation Manual preview
SF-930EU
Brand: Salusfin Pages: 6
PairGain PG-FLEX RT FRL-752 Manual preview
PG-FLEX RT FRL-752
Brand: PairGain Pages: 6
XNET INS2000 Install Manual preview
INS2000
Brand: XNET Pages: 17
D3 DesignCore RVP-TDA3 Series Quick Start Manual preview
DesignCore RVP-TDA3 Series
Brand: D3 Pages: 34
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
Lantech IMR-3003 User Manual preview
IMR-3003
Brand: Lantech Pages: 40
SONIX MP5S Plus Writer Quick Manual preview
MP5S Plus Writer
Brand: SONIX Pages: 23
KYLAND Technology KIEN3016A Hardware Installation Manual preview
KIEN3016A
Brand: KYLAND Technology Pages: 19
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Brand: Avocent Pages: 2

Brands by name

Popular brands

Load more brands