xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
318
Figure 9-45 WAC Port Settings window
The fields that can be configured are described below:
Parameter
Description
From Port / To Port
Select a range of ports to be enabled as WAC ports.
Aging Time (1-1440)
This parameter specifies the time period during which an authenticated host will remain in
the authenticated state. Enter a value between
0
and
1440
minutes. A value of
0
indicates
the authenticated host will never age out on the port. The default value is
1440
minutes
(24 hours).
State
Use this drop-down menu to enable the configured ports as WAC ports.
Idle Time (1-1440)
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between
0
and
1440
minutes. A value of
0
indicates
the Idle state of the authenticated host on the port will never be checked. The default
value is
infinite
.
Block Time (0-300)
This parameter is the period of time a host will be blocked if it fails to pass authentication.
Enter a value between
0
and
300
seconds. The default value is
60
seconds.
Click the
Apply
button to accept the changes made.
WAC Authentication State
Users can view and delete the hosts for Web authentication.
To view the following window, click
Security > Web-based Access Control (WAC) > WAC Authentication State
, as
shown below:
Summary of Contents for xStack DES-3810
Page 1: ......