D-Link xStack DES-3810 Reference Manual Download Page 217

Page: 217 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

204

After clicking the

Edit

button, the following page with be displayed.

Figure 6-49 RIP Settings window

The fields that can be configured are described below:

Parameter

Description

Interface Name

Specifies the IP interface name used for this configuration.

TX Mode

Specifies the RIP transmission mode. Options to choose from are

v1 Only

Compatible

and

v2 Only

. Select

Disable

to disable this option.

RX Mode

Specifies the RIP receive mode Options to choose from are

v1 Only

v2 Only

and

v1 or

. Select

Disable

to disable this option.

State

Specifies that the RIP state will be enabled or disabled. If the state is disabled, then RIP

packets will not be either transmitted or received by the interface. The network configured

on this interface will not be in the RIP database.

Authentication

Specifies to set the state of authentication. When the authentication state is enabled,

enter the password used in the space provided.

Click the

Apply

button to accept the changes made.

Click on the

<<Back

button to return to the previous window.

RIPng (EI Mode Only)

RIPng Global Settings

This window is used to configure the RIPng global settings.

To view the following window, click

L3 Features > RIP > RIPng > RIPng Global Settings

, as shown below:

Figure 6-50 RIPng Global Settings window

Summary of Contents for xStack DES-3810






























































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DES-3810

Reviews:

Related manuals for xStack DES-3810

Brands by name

Popular brands

D-Link xStack DES-3810, Reference Manual

Search results

Summary of Contents for xStack DES-3810

Reviews:

Related manuals for xStack DES-3810

Brands by name

Popular brands