D-Link xStack DES-3810, Reference Manual, Page: 298 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
285
Figure 8-62 Add Egress Access Rule (IPv6 ACL)
The fields that can be configured are described below:
Parameter Description
Access ID (1-500)
Type in a unique identifier number for this access. This value can be set from 1 to 500.
Auto Assign
– Tick the check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
TCP
Select this option to enable the TCP protocol.
TCP Source Port (0-
65535)
Enter the value of the IPv6 layer 4 TCP source port here.
TCP Source Port Mask
(0-FFFF)
Enter the IPv6 TCP source port mask here.
TCP Destination Port
(0-65535)
Enter the value of the IPv6 layer 4 TCP destination port.
TCP Destination Port
Mask (0-FFFF)
Enter the IPv6 TCP destination port mask here.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify that packets that match the access profile are not forwarded by the
Switch and will be filtered.
Priority (0-7)
Tick the corresponding check box to re-write the 802.1p default priority of a packet to the
value entered in the Priority field, which meets the criteria specified previously in this
command, before forwarding it on to the specified CoS queue. Otherwise, a packet will