D-Link NetDefend DFL-260E Reference Manual Download Page 144

Page: 144 / 328

3.19. DefaultInterface

Description

A special interface used to represent internal mechanisms in the system as well as an abstract
"any" interface.

Properties

Name

Specifies a symbolic name for the interface.
(Identifier)

SNMPIndex

Interface index assigned by the system when
persistent interface indexes are enabled. (Default:
0)

Comments

Text describing the current object. (Optional)

Chapter 3: Configuration Reference

144

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands