D-Link NetDefend DFL-260E, Reference Manual

Page: 202 / 328

VoIP Voice over IP. (Default: No)
VoIP_Policy Selects preconfigured VoIP Profile.
FTPControl Enables FTP protocol specific settings. (Default: No)
FTPAllowServerPassive Allow server to use passive mode (unsafe for
server). (Default: Yes)
FTPServerPorts Server data ports. (Default: 1024-65535)
FTPAllowClientActive Allow client to use active mode (unsafe for client).
(Default: Yes)
FTPClientPorts Client data ports. (Default: 1024-65535)
FTPAllowUnknownCommands Allow unknown commands. (Default: No)
FTPAllowSITEEXEC Allow SITE EXEC. (Default: No)
FTPMaxLineLength Maximum line length in control channel. (Default:
256)
FTPMaxCommandRate Maximum number of commands per second.
(Default: 20)
FTPAllow8BitStrings Allow 8-bit strings in control channel. (Default: Yes)
FTPAllowResumeTransfer Allow RESUME even in case of content scanning.
(Default: No)
TFTPControl Enables TFTP protocol specific settings. (Default:
No)
TFTPAllowedCommands Specifies allowed commands. (Default: ReadWrite)
TFTPRemoveOptions Remove option part from request packet. (Default:
No)
TFTPAllowUnknownOptions Allow unknown options in request packet. (Default:
No)
TFTPMaxBlocksize Max value for the blksize option. (Optional)
TFTPMaxFileTransferSize Max size for transferred file. (Optional)
TFTPBlockDirectoryTraversal Prevent directory traversal (consecutive dots in
filenames). (Default: No)
PPTPControl Enables TFTP protocol specific settings. (Default:
No)
PPTPEchoTimeout Specifies idle timeout for Echo messages in the
PPTP tunnel. (Default: 0)
PPTPIdleTimeout SPecifies idle timeout for user traffic in the PPTP
tunnel. (Default: 0)
TLSControl Enables TFTP protocol specific settings. (Default:
No)
TLSHostCert Specifies the host certificate.
Chapter 3: Configuration Reference
202